NetApp Upgrade


fas3020c1> software list

732_netboot.e

732_setup_e.exe

732_sysfiles_e.tar

fas3020c1>

fas3020c1>

fas3020c1>

fas3020c1> software install 732_setup_e.exe

software: installing software, this could take a few minutes…

software: installation completed.

Please type download to load the new software and reboot subsequently for changes to take effect.

fas3020c1> Fri Mar 12 10:48:37 GMT [rc:info]: software: installation completed.

fas3020c1> download

download: You can cancel this operation by hitting Ctrl-C in the next 6 seconds.

download: Depending on system load, it may take many minutes

download: to complete this operation.  Until it finishes, you will

download: not be able to use the console.

Fri Mar 12 10:49:07 GMT [download.request:notice]: Operator requested download initiated

download: Downloading boot device

download: If upgrading from a version of Data ONTAP prior to 7.3, please ensure

download: there is at least 3% of available space on each aggregate before

download: upgrading.  Additional information can be found in the release notes.

Version 1 ELF86 kernel detected.

…………………………………………

download: Downloading boot device (Service Area)

………………………

fas3020c1> Fri Mar 12 10:53:06 GMT [download.requestDone:notice]: Operator requested download completed

fas3020c1> halt

 

CIFS local server is shutting down…

Fri Mar 12 10:53:35 GMT [cifs.auditfile.enable.off:info]: ALF: CIFS auditing stopped.

 

CIFS local server has shut down…

Fri Mar 12 10:53:35 GMT [kern.shutdown:notice]: System shut down because : “halt”.

Fri Mar 12 10:53:35 GMT [iscsi.service.shutdown:info]: iSCSI service shutdown

Fri Mar 12 10:53:35 GMT [fcp.service.shutdown:info]: FCP service shutdown

 

 

CFE version 3.0.0 based on Broadcom CFE: 1.0.40

Copyright (C) 2000,2001,2002,2003 Broadcom Corporation.

Portions Copyright (c) 2002-2005 Network Appliance, Inc.

 

CPU type 0xF29: 2800MHz

Total memory: 0×80000000 bytes (2048MB)

CFE> update flash

Invalid command: “flash”

Available “update” commands:

 

*** command status = -1

CFE> help

Available commands:

 

version             Print CFE version.

update_flash        Updates the boot flash with the firmware image on the PC-Card.

netboot             Boots the supplied URL off the network.

boot_diags          Boots the diagnostic image off of the PC-Card.

boot_backup         Boots the backup image of Data OnTap off of the PC-Card.

boot_primary        Boots the primary image of Data OnTap off of the PC-Card.

boot_ontap          Boots the correct image of Data OnTap

bye                 Reset the system.

flash               Update a flash memory device

autoboot            Automatic system bootstrap.

go                  Start a previously loaded program.

boot                Load an executable file into memory and execute it

load                Load an executable file into memory without executing it

set date            Set current date

set time            Set current time

ping                Ping a remote IP host.

arp                 Display or modify the ARP Table

ifconfig            Configure the Ethernet interface

show date           Display current time according to RTC

show time           Display current time according to RTC

show devices        Display information about the installed devices.

unsetenv            Delete an environment variable.

set-defaults        Reset all system environmental variables to default values.

setenv              Set an environment variable.

printenv            Display the environment variables

help                Obtain help for CFE commands

 

For more information about a command, enter ‘help command-name’

CFE> update_flash

Reading flash0a: Done. 2097152 bytes read

Programming………………………………………………………….done. 2097152 bytes written

Reading fat://ide0.0/X86_ELF/firmware/DEUX/firmware.img: Done. 655424 bytes read

Flash image contains CFE version 3.1.0

Flash image is 655360 bytes, flags 00000001, CRC A3E307FD

Programming…………………..done. 655360 bytes written

CFE> help

Available commands:

 

version             Print CFE version.

update_flash        Updates the boot flash with the firmware image on the PC-Card.

netboot             Boots the supplied URL off the network.

boot_diags          Boots the diagnostic image off of the PC-Card.

boot_backup         Boots the backup image of Data OnTap off of the PC-Card.

boot_primary        Boots the primary image of Data OnTap off of the PC-Card.

boot_ontap          Boots the correct image of Data OnTap

bye                 Reset the system.

flash               Update a flash memory device

autoboot            Automatic system bootstrap.

go                  Start a previously loaded program.

boot                Load an executable file into memory and execute it

load                Load an executable file into memory without executing it

set date            Set current date

set time            Set current time

ping                Ping a remote IP host.

arp                 Display or modify the ARP Table

ifconfig            Configure the Ethernet interface

show date           Display current time according to RTC

show time           Display current time according to RTC

show devices        Display information about the installed devices.

unsetenv            Delete an environment variable.

set-defaults        Reset all system environmental variables to default values.

setenv              Set an environment variable.

printenv            Display the environment variables

help                Obtain help for CFE commands

 

For more information about a command, enter ‘help command-name’

CFE> boot_ontap

Loading: 0×200000/41406484 0x297d014/14083868 0x36eb730/1732450 0×3892692/6 Entry at 0×00200000

Starting program at 0×00200000

Press CTRL-C for special boot menu

nvram: Need to update primary image on flash from version 5 to 7

nvram: Need to update secondary image on flash from version 5 to 7

Updating nvram firmware, memory valid is off. The system will automatically reboot when the update is complete.

 and nvram5 boot block……………..

Fri Mar 12 10:58:16 GMT [nvram.new.fw.downloaded:CRITICAL]: Firmware version 7 has been successfully downloaded on to the NVRAM card. The system will automatically reboot now.

 

 

 

CFE version 3.1.0 based on Broadcom CFE: 1.0.40

Copyright (C) 2000,2001,2002,2003 Broadcom Corporation.

Portions Copyright (c) 2002-2006 Network Appliance, Inc.

 

CPU type 0xF29: 2800MHz

Total memory: 0×80000000 bytes (2048MB)

 

 

Starting AUTOBOOT press any key to abort…

Loading: 0×200000/41406484 0x297d014/14083868 0x36eb730/1732450 0×3892692/6

Autoboot of UPDATE image aborted.

 

CFE>

CFE>

CFE> bye

 

 

 

CFE version 3.1.0 based on Broadcom CFE: 1.0.40

Copyright (C) 2000,2001,2002,2003 Broadcom Corporation.

Portions Copyright (c) 2002-2006 Network Appliance, Inc.

 

CPU type 0xF29: 2800MHz

Total memory: 0×80000000 bytes (2048MB)

 

 

Starting AUTOBOOT press any key to abort…

Loading: 0×200000/41406484 0x297d014/14083868 0x36eb730/1732450 0×3892692/6 Entry at 0×00200000

Starting program at 0×00200000

Press CTRL-C for special boot menu

Fri Mar 12 10:59:22 GMT [nvram.battery.state:info]: The NVRAM battery is currently OFF.

Fri Mar 12 10:59:24 GMT [nvram.battery.turned.on:info]: The NVRAM battery is turned ON. It is turned OFF during system shutdown.

 

NetApp Release 7.3.2: Thu Oct 15 04:17:39 PDT 2009

Copyright (c) 1992-2009 NetApp.

Starting boot on Fri Mar 12 10:59:16 GMT 2010

Fri Mar 12 10:59:57 GMT [fci.initialization.failed:error]: Initialization failed on Fibre Channel adapter 0b.

Fri Mar 12 10:59:57 GMT [kern.version.change:notice]: Data ONTAP kernel version was changed from NetApp Release 7.1.1 to NetApp Release 7.3.2.

Fri Mar 12 11:00:05 GMT [fmmb.current.lock.disk:info]: Disk 0a.18 is a local HA mailbox disk.

Fri Mar 12 11:00:05 GMT [fmmb.current.lock.disk:info]: Disk 0a.17 is a local HA mailbox disk.

Fri Mar 12 11:00:05 GMT [fmmb.instStat.change:info]: normal mailbox instance on local side.

Fri Mar 12 11:00:06 GMT [coredump.spare.none:info]: No sparecore disk was found.

Fri Mar 12 11:00:06 GMT [raid.assim.label.upgrade:info]: Upgrading RAID labels.

Fri Mar 12 11:00:06 GMT [raid.cksum.replay.summary:info]: Replayed 0 checksum blocks.

Fri Mar 12 11:00:06 GMT [raid.stripe.replay.summary:info]: Replayed 0 stripes.

Fri Mar 12 11:00:08 GMT [wafl.inodePath.reinitialize:notice]: System is reinitializing inode path information for volume ‘vol0′.

sparse volume upgrade done. num vol 0.

Vdisk Snap Table for host:0 is initialized

Fri Mar 12 11:00:12 GMT [fcp.service.startup:info]: FCP service startup

Fri Mar 12 11:00:12 GMT [rc:notice]: The system was down for 391 seconds

The option timed.min_skew is deprecated: ignoring attempt to change the value of this option.

Fri Mar 12 11:00:15 GMT [useradmin.added.deleted:info]: The role ‘compliance’ has been added.

Fri Mar 12 11:00:15 GMT [scsitarget.ispfct.linkUp:notice]: Link up on Fibre Channel target adapter 0c.

Fri Mar 12 11:00:15 GMT [useradmin.added.deleted:info]: The group ‘Compliance Administrators’ has been added.

Fri Mar 12 11:00:15 GMT [useradmin.added.deleted:info]: The group ‘Backup Operators’ has been modified.

Fri Mar 12 11:00:15 GMT [scsitarget.ispfct.linkUp:notice]: Link up on Fibre Channel target adapter 0d.

Fri Mar 12 11:00:15 GMT [dfu.firmwareUpToDate:info]: Firmware is up-to-date on all disk drives

Fri Mar 12 11:00:15 GMT [sfu.firmwareDownrev:warning]: Disk shelf firmware needs to be updated on 1 disk shelf.

Fri Mar 12 11:00:15 GMT [sfu.ctrllerElmntsPerShelf:info]: [storage download shelf]: 2 ES controller elements can be updated on 0a.shelf1.

Fri Mar 12 11:00:15 GMT [perf.archive.start:info]: Performance archiver started. Sampling 22 objects and 198 counters.

Fri Mar 12 11:00:16 GMT [sfu.downloadStarted:info]: Update of disk shelf firmware started on 1 shelf.

Fri Mar 12 11:00:16 GMT [sfu.downloadCtrllerBridge:info]: [storage download shelf]: Downloading AT-FCX.3700.SFW on ES controller module A via SES device 0a.14 on 0a.shelf1.

Fri Mar 12 11:04:15 GMT [sfu.suspendDiskIO:info]: Suspending disk I/O to reboot shelf modules for shelf firmware update.

Fri Mar 12 11:04:15 GMT [sfu.rebootRequest:info]: Issuing a request to reboot disk shelf 0a.shelf1 module A.

Fri Mar 12 11:04:15 GMT [ses.shelf.fw.disrUpdFW:info]: SCSI Enclosure Services (SES) disk shelf firmware update disrupts disk I/O. The current shelf firmware (product revision level 3535) does not support Non Disruptive Upgrade (NDU).

Fri Mar 12 11:04:15 GMT [sfu.adapterSuspendIO:info]: Suspending I/O to FC-AL adapter 0a for 70 seconds while shelf firmware is updated.

Fri Mar 12 11:05:31 GMT [sfu.resumeDiskIO:info]: Resuming disk I/O after shelf firmware update.

Fri Mar 12 11:05:31 GMT [sfu.downloadCtrllerBridge:info]: [storage download shelf]: Downloading AT-FCX.3700.SFW on ES controller module B via SES device 0a.15 on 0a.shelf1.

Fri Mar 12 11:09:29 GMT [sfu.suspendDiskIO:info]: Suspending disk I/O to reboot shelf modules for shelf firmware update.

Fri Mar 12 11:09:29 GMT [sfu.rebootRequest:info]: Issuing a request to reboot disk shelf 0a.shelf1 module B.

Fri Mar 12 11:09:29 GMT [ses.shelf.fw.disrUpdFW:info]: SCSI Enclosure Services (SES) disk shelf firmware update disrupts disk I/O. The current shelf firmware (product revision level 3535) does not support Non Disruptive Upgrade (NDU).

Fri Mar 12 11:09:29 GMT [sfu.adapterSuspendIO:info]: Suspending I/O to FC-AL adapter 0a for 70 seconds while shelf firmware is updated.

Fri Mar 12 11:10:48 GMT [sfu.resumeDiskIO:info]: Resuming disk I/O after shelf firmware update.

Fri Mar 12 11:10:48 GMT [sfu.downloadSuccess:info]: [storage download shelf]: Firmware file AT-FCX.3700.SFW downloaded on 0a.shelf1.

Fri Mar 12 11:10:48 GMT [sfu.downloadSummary:info]: Shelf firmware updated on 1 shelf.

Fri Mar 12 11:10:48 GMT [netif.linkUp:info]: Ethernet e0a: Link up.

add net default: gateway 10.209.4.1

Fri Mar 12 11:10:49 GMT [iscsi.service.startup:info]: iSCSI service startup

exportfs [Line 4]: no such directory, /vol/aix_disk4 not exported

exportfs [Line 6]: no such directory, /vol/kkgupta not exported

exportfs [Line 7]: no such directory, /vol/kk not exported

exportfs [Line 8]: no such directory, /vol/nfs-kk not exported

Fri Mar 12 11:10:49 GMT [rc:ALERT]: timed: time daemon started

Fri Mar 12 11:10:49 GMT [nfsd.tcp.rw.ifc.rcv.changed:notice]: As a result of changing nfs.tcp.recvwindowsize nfs.ifc.rcv.high has been changed from 66340 to 98910

Fri Mar 12 11:10:50 GMT [mgr.boot.disk_done:info]: NetApp Release 7.3.2 boot complete. Last disk update written at Fri Mar 12 10:53:38 GMT 2010

Fri Mar 12 11:10:50 GMT [mgr.boot.reason_ok:notice]: System rebooted.

Fri Mar 12 11:10:50 GMT [wafl.scan.start:info]: Starting inode to parent initialization on volume vol0.

CIFS local server is running.

Fri Mar 12 11:10:51 GMT [cifs.share.createFailed:error]: CIFS: Could not create share nbsu_nk. Unknown volume for path “/vol/nbsu_nk”. If the volume has been destroyed, delete the share. If the volume is part of an offline aggregate, then recover the aggregate to regain access to the share.

Fri Mar 12 11:10:51 GMT [cifs.share.createFailed:error]: CIFS: Could not create share dj. Unknown volume for path “/vol/dj”. If the volume has been destroyed, delete the share. If the volume is part of an offline aggregate, then recover the aggregate to regain access to the share.

Fri Mar 12 11:10:51 GMT [cifs.share.createFailed:error]: CIFS: Could not create share tempShare. Unknown volume for path “/vol/puredisk_vxfi”. If the volume has been destroyed, delete the share. If the volume is part of an offline aggregate, then recover the aggregate to regain access to the share.

Fri Mar 12 11:10:51 GMT [cifs.share.createFailed:error]: CIFS: Could not create share tempShare1. Unknown volume for path “/vol/puredisk_vxfi1″. If the volume has been destroyed, delete the share. If the volume is part of an offline aggregate, then recover the aggregate to regain access to the share.

Fri Mar 12 11:10:51 GMT [cifs.share.createFailed:error]: CIFS: Could not create share mscsndmp. Unknown volume for path “/vol/NDMPrsg”. If the volume has been destroyed, delete the share. If the volume is part of an offline aggregate, then recover the aggregate to regain access to the share.

Fri Mar 12 11:10:51 GMT [cifs.share.createFailed:error]: CIFS: Could not create share Openstorage2. Unknown volume for path “/vol/OpenStorage2″. If the volume has been destroyed, delete the share. If the volume is part of an offline aggregate, then recover the aggregate to regain access to the share.

Fri Mar 12 11:10:51 GMT [cifs.share.createFailed:error]: CIFS: Could not create share pmwin35. Unknown volume for path “/vol/pmwin35_vol”. If the volume has been destroyed, delete the share. If the volume is part of an offline aggregate, then recover the aggregate to regain access to the share.

Fri Mar 12 11:10:51 GMT [cifs.share.createFailed:error]: CIFS: Could not create share dip1. Unknown volume for path “/vol/dip1″. If the volume has been destroyed, delete the share. If the volume is part of an offline aggregate, then recover the aggregate to regain access to the share.

Fri Mar 12 11:10:51 GMT [cifs.share.createFailed:error]: CIFS: Could not create share dipnew. Unknown volume for path “/vol/dipnew”. If the volume has been destroyed, delete the share. If the volume is part of an offline aggregate, then recover the aggregate to regain access to the share.

Fri Mar 12 11:10:51 GMT [cifs.share.createFailed:error]: CIFS: Could not create share fasshare. Unknown volume for path “/vol/fas1/fastree”. If the volume has been destroyed, delete the share. If the volume is part of an offline aggregate, then recover the aggregate to regain access to the share.

Fri Mar 12 11:10:51 GMT [cifs.share.createFailed:error]: CIFS: Could not create share cluster_nbu_share. Unknown volume for path “/vol/cluster_nbu_vol”. If the volume has been destroyed, delete the share. If the volume is part of an offline aggregate, then recover the aggregate to regain access to the share.

Fri Mar 12 11:10:51 GMT [cifs.share.createFailed:error]: CIFS: Could not create share share_cluster. Unknown volume for path “/vol/cluster_nbu_vol”. If the volume has been destroyed, delete the share. If the volume is part of an offline aggregate, then recover the aggregate to regain access to the share.

Fri Mar 12 11:10:51 GMT [cifs.share.createFailed:error]: CIFS: Could not create share takeme. Unknown volume for path “/vol/cluster_nbu_vol”. If the volume has been destroyed, delete the share. If the volume is part of an offline aggregate, then recover the agg

Fri Mar 12 11:10:51 GMT [cifs.share.createFailed:error]: CIFS: Could not create share takeme. Unknown volume for path “/vol/cluster_nbu_vol”. If the volume has been destroyed, delete the share. If the volume is part of an offline aggregate, then recover the aggregate to regain access to the share.

 

 

Data ONTAP (fas3020c1.vxindia.veritas.com)

 

login:

About these ads

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

Follow

Get every new post delivered to your Inbox.

%d bloggers like this: